|
|
Post by Cooper on Sept 30, 2005 12:57:40 GMT
 where are the differences ?
|
|
|
|
Post by chris burgess on Sept 30, 2005 13:22:16 GMT
where are the differences ? there are subtle differences, the main one being the positioning of the air intakes for the motor and esc. other than that, its the etching that defines the shape of the side windows basically. two very similar shells, but they are different |
|
|
|
Post by Cooper on Sept 30, 2005 15:46:57 GMT
so no need for new shell, only wings  |
|
|
|
Post by Northy on Sept 30, 2005 18:11:51 GMT
I've just compared them both and:
The two front air intakes are in exactly the same place.
The two rear air intakes on the P8 shell are no more.
The X10 does not have the two "ridges" on the top flat rear section (above where the air intakes used to be).
Thats it! ;D
|
|
|
|
Post by Cooper on Sept 30, 2005 18:18:07 GMT
no reason to change ...  |
|
|
|
Post by Northy on Sept 30, 2005 18:21:06 GMT
Well thats my P8 shell in the Avatar.
X10 will be more areodynamic ;D
|
|
|
|
Post by Cooper on Sept 30, 2005 18:35:41 GMT
Well thats my P8 shell in the Avatar. X10 will be more areodynamic ;D you'll go 0.0000001sec faster  |
|
where are the differences ?
