Updated X10 parts

[Northy]

Hi Strobe,

I'd probably start off with a setup like the one on the X10 Settings sheet.

40wt oil front
50wt oil rear

I'd use the following springs:

S119 front (6.0T / 1.3)
S136 rear (6.5T / 1.4)

If its bumpy try S118 (5.5T 1.3) on the rear.

Hope that helps,

G

PS have you joined the X10 owners Team forum? Tom posts in there, doesn't he race down your neck of the woods?

[yardy]

ye I've raced my pred at coventry, my set up for coventry is in the set up section, as for the new springs, i run the new 6.0t fronts there with the same oil set up etc thats on the posted set up. The new rears I haven't ran there yet, I tried the prototype 1's i was sent but apparently they were slightly stiffer than the production silver ones and i didn't think they were any improvement round there than the blacks. I will probably give the silvers a run there next week tho again with the same oil set up to start with. I think that the tyres on there are posted wrong though, i run schumacher green spikes there all round, but when I am there next week I am going to try yellows if it's dry because I think they'll be better.
If you want any help feel free to come over, we'll be in a green and orange dome shaped tent.

Tom

[strobex10]

Cheers for the info Northy and Tom.
Can you use S136, S118, S119 and S120 on the front. I thought these were for the rear.
Northy I have signed up for the X10 owners forum.

[Northy]

Yeah, you can use all the springs on the front or back if you wanted.

G

[strobex10]

Cheers Northy