Rocker crank pivot pins..

[alfonzo]

Hi all,

Building my X10 and noticed that the rocker crank pivot pins stick out at different angles from the front gear box top. Checked for burrs etc, but it seems that's the way the moulding has been tapped. Built up the rocker arms, etc and they certainly don't match one side to the other..

Anyone had any experience like this?

Thanks in advance

Al

[restimax]

hi,

also I have this problem fortunately in my case is light...

[bigboss]

I didn't get you're last remark, but yes I got 2 G.B. tops and they both had this problem. No big deal. Just drop them an e mail they will sort you out I'm sure.
It seems the tapping of the holes was done at different angles, so you end up with one tire touching the ground before the other.
cliff

[pro4nut]

Use some plumbers ptfe tape around the threads on the pivot post. this takes up the slack in the thread, then run a bead of the glue that is super around the edge once screwed in