|
|
Post by pro4nut on Sept 18, 2006 7:59:50 GMT
I am looking to run 2 degree's rear toe in, so in relation to Northy's points about set up stations i was thinking that someone out there might be able to tell me the length of rear toe link required to achieve this. May be even put a chart together??
|
|
|
|
Post by chris burgess on Sept 18, 2006 8:37:05 GMT
I will get hold of my friends setup board, and report back on this. A chart is an excellent idea, although I am very happy to do this, I wont be able to get the setup board until next sunday  |
|
|
|
Post by pro4nut on Sept 18, 2006 11:45:43 GMT
Wish i'd thought of it sooner.
Got the F3, 4 and 5's this weekend
|
|
|
|
Post by Northy on Sept 18, 2006 11:49:22 GMT
I've got something writtern down at home. Why only 2 degrees? I take it thats per side? Ilooked at a BX and that had 3.5 per side!  /Thats why I think I'm not using enough. G |
|
|
|
Post by pro4nut on Sept 18, 2006 17:37:32 GMT
Sorry touring car driver, by side yes.
i'm to used to adjusting this by unscrewing the block marked 2 and swapping with the one marked 3
|
|
/Thats why I think I'm not using enough.