Tom Yardy- Tiverton set-up

[yardy]

This was the set up i used at the Tiverton national 2006- low traction, severe bumps and made of clay.

Front Rear


Springs - 6.5t 6.0t/gold
Pistons - hard/valve soft
Piston hole - std std
Oil weights - ass. 35wt ass. 50wt
Toe-in per side - parallel 2degs
Camber per side - 0 deg 2 degs
Castor - right back
Ground clearance - 16mm 22mm
Anti-roll bars - none none
Front upright to upper wishbone - std spacer
rear lower upright - upper hole
Damper pickup point - middle
Tyres - PL step-pins M3 PL step-pins M3
(The fronts were cut n shut to 8 rows in width)
1.5mm spacer under the rear fixing point of the front wing.

Motor - Orion V2 10x2
Cells - Orion GP4300 team cells
Speedo setting - max
Front brake balance - 2 x o rings
Pinion - 20
Spur - 73
overall ratio - 8.9

Tom

[ralphy]

When you say you use 6.5t spring on the front do you mean the silver 1.4 dia 6.5t or the black 1.3 dia 6.5t?

[bigboss]

He means the softer 6.5 turn 1.3 mm (9 lb/in) Ralphy. He said he changed back to the 6.5 from the kiddy set up (at which he had a 6.0) to get more roll out of the front (more roll = softer).