|
|
Post by chris burgess on Dec 18, 2005 18:55:35 GMT
Run a 3mm drill through the rear upright and put a bolt all the way through the upright. It won't break again!
by Northy!
|
|
|
|
Post by turbomatt on Feb 19, 2006 14:42:07 GMT
Hi can you show any pics?  |
|
|
|
Post by restimax on Aug 7, 2006 12:43:07 GMT
Hi can you show any pics? upp.... ;D  |
|
|
|
Post by chris burgess on Aug 7, 2006 19:12:24 GMT
no need for pictures....
take off the rear hub from the car, and simply drill the mounting holes all of the way through the hub. obviously you need to take care to get them straight, but it's not that difficult.
Then you need to source a long M3 bolt, and a suitable nyloc nut and 2 washers (one for each side), and reasemble as you normally would, apart from using the long M3 bolt inplace of the two shorter screws you used previously.
probably makes no sense at all that!
|
|
|
|
Post by restimax on Aug 7, 2006 19:39:36 GMT
if I have not understood badly eliminates the 2 bolt and of it you put one single long? excuse me I have asked you the photo for guilt for my English bad... ;D |
|
|
|
Post by chris burgess on Aug 8, 2006 8:38:35 GMT
thats correct. one bolt all the way through at the bottom. don't worry about your english - we can all understand it eventually! ;D |
|
silky
New Member
Posts: 29
|
Post by silky on Aug 24, 2006 16:14:54 GMT
Chris, the long m3 screws that you use, you dont by any chance know a part number or anything for the ones you used do you?, or are they just random ones from you pitbox?
Ben
|
|
|
|
Post by Cooper on Aug 24, 2006 18:05:00 GMT
just a looong M3 screw and chop off what's to long |
|
|
|
Post by chris burgess on Aug 24, 2006 19:40:40 GMT
Chris, the long m3 screws that you use, you dont by any chance know a part number or anything for the ones you used do you?, or are they just random ones from you pitbox? Ben Hiya Ben - mine came off an old Cat XLS front end.....so they were just random ones. Schumacher speed secrets stand in your local LHS often have bags of otherwise useless screws and washers for around £1.99, so try looking in there first |
|
silky
New Member
Posts: 29
|
Post by silky on Aug 24, 2006 22:26:51 GMT
|
|
|
|
Post by restimax on Aug 28, 2006 17:53:49 GMT
this is the mod, but new rear upright they have already the hole from 3 milimeter passing from part to part.  |
|
bigboss
Full Member
preds rule,the others are too slow!
Posts: 196
|
Post by bigboss on Aug 28, 2006 18:08:40 GMT
Yes that is right Resti. Well done.
|
|
