Itsik
New Member
Posts: 39
|
Post by Itsik on Jun 21, 2006 16:05:39 GMT
At Chris's request, here is my starting setup.
F Sus. Toe: 0 Caster: Stock Camber: -2 Deg Ride Height: 16mm Shock Oil: 30wt Piston: Hard+Valve Spring: Black 6.0T/1.3 Tires: Losi Blockheads Silver
R Sus Toe Link Length: 17.5mm Camber: -1.5 Deg Ride Height: 22mm Sway bar: Std with the mounts on the holes closer to the chassis (Stiff) Shock oil: 50wt Piston: 2 hole Spring: Silver 6.5T/1.4 + Preload spring Rod End Mounting: Lower Hole Tires: Bow-Tie M3 or Holeshot M3 Wings: Std OneWay: Almost Locked (all the O-rings on the coupling)
The tires mentioned here work very good on tracks with a lot of loose dirt on them, you can adjust the car to differant grip levels (blue groove etc.) by using other tires.
That's about it.
Hope it helps
Itsik
|
|