|
|
Post by Northy on Sept 28, 2005 18:39:08 GMT
|
|
|
|
Post by Northy on Sept 28, 2005 18:40:10 GMT
Doesn't that speedo look crap! And I'll have to take the tape of the side of the receiver!  |
|
|
|
Post by Cooper on Sept 28, 2005 18:49:05 GMT
LOL Northy  use a CS Rocket MAX esc, they are beautiful that steering link bitch is carbon ? |
|
|
|
Post by Northy on Sept 28, 2005 19:17:27 GMT
Dan wanted pictures of the threaded rod steering link.
The link between the two steering arms is carbon, yes! ;D
|
|
|
|
Post by Northy on Sept 28, 2005 19:19:42 GMT
Oooppps, forgot to say that I use B4 servo mounts in my Preds. It moves the servo more towards the centre of the car, and gives more room for the ball joint on the end of the steering link.
I also open up the hole in the chassis that the steering link goes through.
|
|
|
|
Post by Cooper on Sept 28, 2005 19:30:04 GMT
hahahahhaha when i type -b i t c h- there comes -pregnant dog- in my message
|
|
|
|
Post by Northy on Sept 28, 2005 19:34:13 GMT
You callin me a biatch Coop?  |
|
|
|
Post by Cooper on Sept 28, 2005 19:46:33 GMT
You callin me a biatch Coop? hahaha nope the steering link is a biatch, ;D |
|
|
|
Post by Cooper on Sept 28, 2005 19:47:22 GMT
and..... how do you make bend in carbon link  ?? |
|
|
|
Post by Northy on Sept 28, 2005 19:52:46 GMT
No the bit with the ball joint on one end (connected to the servo) is metal, the bit between the allow steering arms is carbon.
|
|
|
|
Post by Cooper on Sept 28, 2005 20:41:21 GMT
No the bit with the ball joint on one end (connected to the servo) is metal, the bit between the allow steering arms is carbon. ooooooooooooooh you've painted it black(rolling stones lol) or what did they do with it to make it black ? |
|
|
|
Post by Northy on Sept 28, 2005 21:05:13 GMT
Don't know, it came black. ;D
|
|
|
|
Post by danreynolds on Sept 28, 2005 21:06:50 GMT
What did you use for the ball joint on the servo end of the steering rod I only have a standard ball joint, but the one on your car looks much wider where the steering rod is fixed in. |
|
|
|
Post by Cooper on Sept 28, 2005 21:07:57 GMT
it's an old TTech ball joint thing, I think it's from the touring cars
|
|
|
|
Post by Northy on Sept 28, 2005 21:14:03 GMT
Yeah, forgot about that. Its off the TTech touring car. I've used it because the servo is closer to the centre of the chassis.
|
|
??